The hottest National Conference on quality improve

The National Conference on quality improvement of building waterproof products was held

the National Conference on quality improvement of building waterproof products was held

December 8, 2017

[China paint information]

on December 7, 2017, the 2017 National Conference on quality improvement of building waterproof products was held in Haikou. The meeting was hosted by AQSIQ and China building waterproofing Association. This year, for the sixth consecutive year, the General Administration of quality supervision, inspection and Quarantine (AQSIQ) listed the construction waterproof membrane products as the key products for annual quality improvement, and carried out quality improvement work in the construction waterproof industry. At the conference, the General Administration of quality supervision, inspection and Quarantine (AQSIQ) reported on the post certification supervision report of building waterproof coiled materials in 2017, the national pumping of building waterproof coiled materials, waterproof coating products and building sealant products in 2017, and the "quality inspection sword" action of building waterproof coiled materials in 2017. The China building waterproofing Association issued the "implementation plan for the implementation of the guiding opinions of the CPC Central Committee and the State Council on quality improvement actions in the building waterproofing industry" and made the "2017 work report on quality improvement in the building waterproofing industry"

(check all the pictures of Chinese coatings)

on the site of the 2017 National Conference on improving the quality of building waterproof products

ZHENG Weihua, inspector of the product quality supervision department of the General Administration of quality supervision, inspection and quarantine, Li Gaocheng, director of the anti counterfeiting Coordination Office of the law enforcement supervision department of the General Administration of quality supervision, Li Weiguo, President of the China building waterproof Association, Zhu Dongqing, secretary general, and other leaders, presidents and vice presidents of the association Executive directors, directors, representatives of member units, industry experts and media attended the meeting. The meeting was presided over by Li Xiaobo, director of the production license management division of the product quality supervision department of the General Administration of quality supervision, inspection and quarantine

(check all pictures of Chinese coatings)

Li Xiaobo, director of the production license management division of the product quality supervision department of the General Administration of quality supervision, presided over the meeting

the pass rate of on-site spot inspection of post license supervision was 1.6% higher than that of last year

from September to November 2017, the General Administration of quality supervision, inspection and quarantine entrusted Shandong, Liaoning, Hebei, Jiangsu, Zhejiang, Anhui, Henan, Hubei, Sichuan The provincial quality and technical supervision departments in 10 key areas of building waterproof coiled material products such as Guangdong (only the review enterprise Magna International of Canada launched the concept car "MMLV (multi material lightweight vehicle)" industry using multi lightweight materials) carried out special supervision and inspection on local certified enterprises, and a total of 102 enterprises were randomly selected. Among them, 60 were subject to initial supervision and inspection. The total number of non conformities in on-site inspection decreased by 18.8% compared with 2016, and the number of serious non conformities decreased by 76.3%; The use of 55 high-performance electromechanical devices such as variable frequency electromechanical devices and servo electromechanical devices with high speed ratio, high stability and stepless speed regulation in 51 enterprises will greatly simplify the mechanical structure of the experimental machine. 50 batches of products have passed the test, with a pass rate of 90.9%, which is 1.6% higher than that in 2016. 42 companies were supervised and reviewed (looking back), and 40 companies completed the rectification. Five batches of products from five companies were sampled on site. After testing, they were all qualified, with a pass rate of 100%, an increase of 12.5% over 2016

the qualified rate of coiled material drawn from China is 89.7%. From July to October 2017, the General Administration of quality supervision, inspection and Quarantine of the people's Republic of China (AQSIQ) conducted a random inspection of 126 batches of building waterproof coiled material products produced by 126 enterprises in 19 provinces, autonomous regions and municipalities directly under the central government, including Beijing, Tianjin, Hebei, Liaoning, Jiangsu, Zhejiang, Anhui, Shandong, Henan, Hubei, Hunan, Guangdong, Chongqing, Sichuan, Shaanxi, Gansu, Qinghai, Ningxia and Xinjiang. Through random inspection, it was found that 13 batches of products did not meet the requirements of the standard, and the unqualified items involved 14 items, such as soluble content, thermal aging, low temperature flexibility, elongation, peel strength, adhesion and heat resistance. The qualification rate of enterprises and products was 89.7%

the qualified rate of national paint is 95%. In the second batch of national product quality sampling in 2017, 40 batches of waterproof coating products produced by 40 enterprises in 12 provinces, autonomous regions and municipalities directly under the central government, including Hebei, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Shandong, Henan, Hubei, Hunan, Guangdong and Guangxi, were randomly selected. Through random inspection, it was found that two batches of products did not meet the standard requirements, and the unqualified items involved naphthalene content and low-temperature flexibility. The qualification rate of enterprises and products is 95%

the qualified rate of sealant is 92.5%. In the third batch of national product quality sampling in 2017, 40 batches of construction sealant products produced by 40 enterprises in 8 provinces and municipalities including Beijing, Shanghai, Jiangsu, Zhejiang, Shandong, Henan, Guangdong and Sichuan were randomly selected. Through random inspection, it was found that three batches of products did not meet the standard requirements, and the unqualified items involved tensile bond failure area, tensile modulus and tensile bond strength. The qualification rate of enterprises and products was 92.5%

"quality inspection sword" investigated and dealt with 142 cases of quality violations

in the 2017 "quality inspection sword" action, law enforcement inspections were carried out on relevant enterprises, and the regional rectification of some key areas of waterproof coiled material production was "reviewed", so as to prevent problems from rebounding, and organize the investigation and treatment of unlicensed production, non-compliance with standards, passing fake goods for real, passing inferior goods for good and other quality violations. As of the end of November, more than 1200 production enterprises have been inspected, 142 quality violations have been investigated and dealt with, and counterfeit and shoddy waterproof coiled materials worth more than 2 million yuan have been seized

(check all the pictures of Chinese coatings)

Li Gaocheng, director of the anti counterfeiting Coordination Office of the law enforcement supervision department of the General Administration of quality supervision, inspection and Quarantine of the General Administration of quality supervision and Quarantine of the people's Republic of China, informed the 2017 "quality inspection sword" action of building waterproof coiled materials

the new era has given the industry a new mission

at the meeting, Zhu Dongqing, Secretary General of the China building waterproof Association, made a work report entitled "the new era has given the new mission to improve the quality of the industry chain and set sail". The report points out that in the past six years, the industry has promoted the supply side structural reform with the improvement of product quality. This year, the improvement of waterproof engineering standards is taken as a breakthrough to promote the quality improvement in the field of construction engineering. The guiding opinions of the CPC Central Committee and the State Council on carrying out quality improvement actions (hereinafter referred to as the Guiding Opinions) focuses on continuously improving the quality of products, projects and services, which determines the direction for the industry to carry out the quality improvement of the whole industrial chain

(check all pictures of Chinese coatings)

ZHU Dongqing, Secretary General of China building waterproofing Association, made a work report

the report reviewed the achievements of quality improvement in the past six years, which is reflected in: forming a value orientation of quality first; The market pattern of quality competition has initially taken shape; The manufacturing level of industrial equipment has been upgraded, and the technical equipment of key enterprises has reached the international advanced level; Optimize the industrial structure, eliminate backward production capacity and accelerate the pace of transformation and upgrading; Drive the continuous growth of industrial benefits; Further implement the quality subject of the enterprise; The product structure is optimized, and the product share meeting the medium and high-end market is expanding year by year; The qualified rate of the quality of building waterproof membrane products from the national standard rose from 81.7% in 2011 to 93% in 2016

the report also faces three major problems in improving the quality of the industry: the high leakage rate of buildings has not fundamentally changed; Backward overcapacity, product homogenization is common, and the industry concentration is low, so it is urgent to create a market environment of fair competition; The weakness of quality improvement is the lack of a large number of qualified industrial workers in terms of construction service quality

therefore, the report believes that improving the quality of the whole industry chain from three aspects: product quality, engineering quality and service quality is the "golden key" to solve the problem, and it is also the new mission of quality improvement given to the industry in the new era. The report also puts forward specific measures for quality improvement in the next stage

in 2018, the association will continue to work on improving product quality and engineering service quality. Including assisting the General Administration of quality supervision, inspection and quarantine to carry out post certification supervision, crack down on fake and shoddy products, create quality improvement demonstration areas, carry out demonstration projects, cultivate demonstration enterprises, carry out standard leader activities, carry out quality improvement activities in the building waterproof industry, organize physical property inspection and comparison tests of building waterproof coiled materials, carry out product and engineering standard preparation, promote the "integration of two modernizations" in the industry, and create a pilot enterprise of full staff quality management, Promote the Ministry of housing and urban rural development to strengthen project quality supervision and establish a waterproof project quality assurance insurance market mechanism, carry out vocational skills training and competition, and give play to the exemplary role of alliance enterprises

the report finally said: "the 19th CPC National Congress has brought new impetus to the quality improvement of the whole industrial chain. The association will lead the industry to implement industrial policies, focus on improving quality and efficiency, and take the supply side structural reform as the main line to carry out the quality improvement of the whole industrial chain, so as to realize the sustainable and healthy development of the industry and jointly welcome China into the 'new era of quality'."

(check all pictures of Chinese coatings)

Miao Yan, vice president of China building waterproofing Association, read out the "implementation plan for the implementation of the guiding opinions of the CPC Central Committee and the State Council on quality improvement actions in the building waterproofing industry"

in order to fully implement the spirit of the 19th CPC National Congress and the requirements of the guiding opinions, carry out the quality improvement of the whole industrial chain in the industry, The association has formulated the implementation plan for the construction waterproof industry to implement the guiding opinions of the CPC Central Committee and the State Council on carrying out quality improvement actions (hereinafter referred to as the implementation plan). At the meeting, Miao Yan, vice president of China building waterproofing Association, read out the notice on printing and distributing the implementation plan. The plan clarifies the guiding ideology, basic principles, main objectives, main measures and safeguard measures for the quality improvement of the whole industrial chain of the industry, and more clearly points out that the quality improvement of the whole industrial chain is not only the quality improvement of products, construction and services at the micro level, but also the quality improvement of the development of the industry at the macro level

(check all pictures of Chinese coatings)

inspector Zheng Weihua of the product quality supervision department of the General Administration of quality supervision, inspection and quarantine made a speech

inspector Zheng Weihua affirmed the contribution of the association to the quality improvement of the industry. He said that over the years, the waterproof industry has adhered to its original intention, constantly met market demand, and continued to make innovation and progress. China's demographic dividend no longer exists, and labor costs are rising. In the future, the industry should put quality first in its development. The demand is changing, the market is changing, and the waterproof technology, materials and personnel skills also need to change. Enterprises should make their own characteristics in materials, services, brands and so on. "Not every enterprise should develop according to one model. As long as we keep the bottom line of basic requirements such as quality and environmental protection, and keep the bottom line of integrity, a hundred flowers can bloom." He pointed out that the waterproof industry should find its own breakthrough point in improving the quality of the tested sample 101, including the inlet part, fixed on the oscillating part 102. In the future, it should solve several problems: first, connect with the financial system; second, promote the establishment of a series of scientific and technological platforms in scientific and technological innovation; third, go out with the help of policies such as the "the Belt and Road", create international brands, and strive for greater development

at the meeting, Shouguang municipal government, the winners of the national quality award, Beijing Dongfang Yuhong Waterproof Technology Co., Ltd. and Chengdu Saite waterproof material Co., Ltd. exchanged their experience in quality improvement

(check all pictures of Chinese coatings)

Shouguang municipal government makes experience exchange

(check all pictures of Chinese coatings)

Beijing Dongfang Yuhong Waterproof Technology Co., Ltd. makes experience exchange

(check all pictures of Chinese coatings)

Chengdu Saite waterproof materials Co., Ltd. makes experience exchange

this year is a milestone year in China's quality development history. The 19th CPC National Congress put forward the theory of socialism with Chinese characteristics for a new era, making it clear that the main contradictions in our society have been transformed